SlurryDry SSG™ is a non-hazardous super absorbent designed for the concrete polishing industry to solidify concrete slurry into stable, landfill-accepted solids. It quickly absorbs high-pH wastewater, reduces waste volume, and creates a non-flowing material that is easier to manage, transport, and dispose of.
SlurryDry
Slurry Solidification Agent
Sizes:
40 lb bag
Coverage Rates:
1 lb / 5–10 gal of slurry
Dilution Ratio:
1 lb / 5–10 gal of slurry
Quick Links & Tools
✔
Reduced Waste Volume
Only adds 1–3% to waste volume for decreased hauling costs.
✔
Immediate Solidification
Solidifies immediately to help reduce processing time.
✔
Landfill Compliance
Helps waste pass the EPA Method 1311 Toxicity Characteristic Leaching Procedure.
✔
Paint Filter Test Support
Helps pass the EPA 9095B paint filter test for compliant landfill disposal.
✔
Stable Solid Formation
Forms a stable, non-flowing solid from concrete slurry that is easy to manage and dispose.
✔
High Absorption Capacity
Absorbs 200–300 times its weight in high-pH wastewater.
✔
Non-Leaching Formula
Accelerates evaporation in the landfill while helping reduce leaching.
✔
Environmental Solution
Provides a non-hazardous solution for solidification of cement fines and silt.
Read all instructions and SDS information before use.
SlurryDry SSG™ should be handled according to the product’s safety and application instructions. Avoid creating or breathing dust during handling.
Preparation
- Collect concrete slurry in a suitable containment drum, container, or pit.
- Use a wet vacuum for slurry collection where appropriate.
- If excess water has already been removed, reduce the recommended dosage as needed.
Standard Application Procedure
- Add 1 lb of SlurryDry SSG™ for each 5–10 gallons of slurry.
- Mix until all drying crystals have made contact with the water to begin absorption.
- Add additional SlurryDry SSG™ if a dryer consistency is desired.
- Continue mixing until the slurry has solidified, normally within less than 5 minutes.
- Once solidified, shovel the material into trash bags and dispose of it as normal construction waste where permitted.
Maintenance
- Allow evaporation to continue over time to reduce the bulk weight of the solidified material.
- Store and dispose of the solidified slurry according to applicable local waste disposal requirements.
- Keep the product dry and properly sealed when not in use.
What is SlurryDry SSG™?
SlurryDry SSG™ is a non-hazardous super absorbent used in the concrete polishing industry to solidify concrete slurry into landfill-accepted solids.
What is SlurryDry SSG™ used for?
It is designed to solidify concrete slurry and help manage and dispose of waste generated during wet-grinding concrete.
What size is SlurryDry SSG™ available in?
SlurryDry SSG™ is available in 40-pound bags.
What is the mixing ratio for SlurryDry SSG™?
The recommended ratio is 1 pound of SlurryDry to 5–10 gallons of slurry.
How much volume does SlurryDry SSG™ add?
SlurryDry SSG™ only adds approximately 1–3% to the waste volume, helping reduce hauling costs.
How quickly does SlurryDry SSG™ solidify slurry?
SlurryDry SSG™ solidifies immediately, helping reduce processing time.
Does SlurryDry SSG™ absorb water?
Yes. It can absorb approximately 200–300 times its weight in high-pH wastewater.
Is SlurryDry SSG™ hazardous?
No. SlurryDry SSG™ is a non-hazardous solution for solidifying cement fines and silt.
Does SlurryDry SSG™ help with landfill disposal?
Yes. It forms a stable, non-flowing solid from concrete slurry that is easier to manage and dispose of.
What applications is SlurryDry SSG™ recommended for?
It is recommended for slurry cleanup during wet-grinding concrete and can also be used as an addition when using KickStart™.
Does SlurryDry SSG™ help reduce leaching?
Yes. Its non-leaching formula helps accelerate evaporation in the landfill.
Where can I find technical and safety information?
Technical information and the Safety Data Sheet (SDS) are available for SlurryDry SSG™. You can also contact Curecrete for additional product information and support.
Where can I purchase SlurryDry SSG™?
You can contact Curecrete directly for pricing, product availability, or assistance locating a Curecrete representative or distributor.
Coverage Calculator
Calculate Your Product Needs
Coverage Rates: 1,500–2,000 ft2/gal (37–50 m2/L)
RetroGuard
Coverage estimate based on the selected area and RetroGuard coverage rate.
Estimated
0 gal
Based on 1,500–2,000 ft²/gal
Try These Picks
Get In Touch
Need pricing or more details? We’re ready to support your project and answer any questions you may have. Let’s keep the conversation going!