CreteStrip FS is a concentrated stripper formulated to give concrete floors a fresh start in preparation for densification or restoration. CreteStrip FS is designed for concrete and terrazzo floors, aiding in the quick and effective removal of acrylic floor coatings, acrylic curing compounds, waxes, carpet and tile mastic, paint, tire marks, and more!
CreteStrip FS
Concentrated Floor Stripper
Sizes:
55 gal, 5 gal, 1 gal
Coverage Rates:
100 ft²/gal (2.5 m²/L)
Dilution Ratio:
1:20 | 7 fl oz per gal | 55 mL per L
Quick Links & Tools
Removes Tough Floor Buildup
Strips acrylic coatings, curing compounds, wax, carpet and tile mastic, and tire marks from concrete and terrazzo.
Works in Minutes
Softens floor finishes in 5 minutes and guard products in 1 minute, so crews spend less time waiting.
Preps Floors for Densification
Gives concrete a clean start before Ashford Formula, RetroPlate, or other restoration work.
Safe on Concrete and Vinyl
Won't soften concrete or damage nearby vinyl surfaces.
Goes Further
Concentrated 1:20 formula covers up to 100 ft²/gal (2.45 m²/L).
Easier on Crews
Low VOCs, no ammonia, a mild scent, and minimal foam for easier rinsing.
For full application instructions, view the Technical Data Sheet (TDS).
What can CreteStrip FS remove?
CreteStrip FS is highly effective on acrylic floor coatings, carpet and tile mastic, waxes, tire marks, construction chalk, and oil and grease stains. It’s also effective on acrylic curing compounds and moderately effective on paint and spray adhesive.
What does CreteStrip FS not remove?
It is not effective on permanent marker ink, spray paint, or asphalt residue.
Can I use CreteStrip FS before Ashford Formula or RetroPlate?
Yes. CreteStrip FS removes coatings and buildup to leave the concrete bare, so densifiers like Ashford Formula and RetroPlate can penetrate the surface and react with the concrete.
What happens if CreteStrip FS dries on the floor?
It can bond to the surface and become difficult to remove. Keep the floor uniformly wet during dwell time and add more solution to areas that start to dry.
Does CreteStrip FS need to be diluted?
Yes. Dilute 1:20 with water, about 7 fl oz per gallon (55 mL per liter).
How quickly does CreteStrip FS work?
Floor finishes are effective within 5 minutes. Guard products are effective within 1 minute.
What can CreteStrip FS remove?
It effectively removes acrylic floor coatings, acrylic curing compounds, waxes, carpet and tile mastic, paint, tire marks, construction chalk, oil and grease stains, and more.
Does CreteStrip FS damage vinyl or concrete?
No. It does not damage vinyl and does not soften concrete.
Does CreteStrip FS contain ammonia?
No. It is ammonia-free and has a mild fragrance with low VOCs and low foaming.
Where can I find technical and safety information?
Technical Data Sheets (TDS) and Safety Data Sheets (SDS) are available for CreteStrip FS. You can also contact Curecrete for additional product information and support.
Where can I purchase CreteStrip FS?
You can contact Curecrete directly for pricing, product availability, or assistance locating a Curecrete representative or distributor.
Coverage Calculator
Calculate Your Product Needs
Coverage Rates: 1,500–2,000 ft2/gal (37–50 m2/L)
RetroGuard
Coverage estimate based on the selected area and RetroGuard coverage rate.
Estimated
0 gal
Based on 1,500–2,000 ft²/gal
Find a Curecrete Expert Near You
PLEASE FILL IN THE FORM BELOW
Finding your local expert
Connecting your location with our representative network.
Try These Picks
Get In Touch
Need pricing or more details? We’re ready to support your project and answer any questions you may have. Let’s keep the conversation going!